DS18 Good Bass Package

DS18 Good Bass Package Package Includes: • (1) GEN-X4500.1D – Class D 1-Channel Monoblock Amplifier 4500 Watts • (2) ZR12.4D – 12″ Subwoofer with 1600W Watts DVC 4-Ohm • (1) AMPKIT4 – 4-GA Installation Kit For Car A great bass package ready to hit the street and pump out some hard-hitting bass throughout the air and really ease the bass monster inside you. This package will satisfy any entry level bass head will great sounding bass and amplifier especially picked by out professionals to not only power your subs to their full potential but leave room for longevity and reliability as well. We also include a high quality CCA 4ga installation kit to help you complete you installation easily. Highlights Two hard hitting ZR12.4D subwoofers to bring massive ground shaking bass into your life and really put the thump in your trunk! These sub woofers are made to satisfy all your bass cravings! High powered amplifier to push the 12s to their max with great efficiency and longevity bringing them to their maximum potential all while retaining longevity and reliability. High Quality CCA installation kit made of CCA copper with a very high conductivity so you may power your amp to its maximum potential. Includes power, ground, remote, RCA, and fusing for the installation. Technical Details ZR12.4D Specifications Nominal Diameter 12″ / 305mm Nominal Impedance 4 + 4 ohms RMS Power Handing 750W MAX Power Handing 1500W Sensitivity (1w/1m) 82 dB Frequency Response 25Hz – 200Hz Recommended Lo Pass Crossover 90 Hz Motor Voice Coil Diameter 2.5” / 61.6 mm VC Former Material Aluminum Winding Material Copper Cone Material Non Pressed Paper Dust Cap Material PPI Surround Material Foam Basket Material Steel Basket Color/Finish Matte Black Magnet Material Ferrite Magnet Weight 100 oz Displacement Volume 0.07 ft3 Measurements Overall Diameter 12.44” / 316mm Overall Depth 7.7”/195.56mm Front Mount Baffle Cutout 11”/279.43mm Mounting Depth 6.6”/168mm Overall Depth 6.1″ / 155mm GEN-X4500.1D Power Total Watts (Peak) 4500W RMS Power @ 4 ohm 1 x 500W RMS Power @ 2 ohm 1 x 900W RMS Power @ 1 ohm 1 x 1500W Min. Speaker Impedance 1 Ohm Audio Frequency Response 10-500Hz Signal to Noise Ratio 98 dB Total Harmonic Distortion (THD) 0.0008 Low Level Input Range 0.2-6V High Level Input No Selectable X-Over LPF Fixed X-Over Filter Range 40-180Hz Bass Boost Range 0~12dB Bass Boost Frequency 30~80Hz Infrasonic Filter 17~50Hz Phase Selector No Input Impedance 10k Input Sensitivity 0.2V – +6V Channel separation 50 db Remote Gain Control 0.2 – 6V Features Amplifier Class Digital Amplifier Type MonoBlock Subwoofer Led Indicator Power / Protection Power Input Terminal Size 0Ga Fuse Rating 4x40A Remote Level Control Yes, Dash Mount Cooling Fan Yes Voltmeter No Thermal Protection Yes Over-Load Protection Yes DC Output Protection No Short Circuit Output Protection Yes Voltage Input Protection Yes Cliping Protection No Measurements Overall Lengh 16.9” / 430 mm Overall Wide 7.48” / 190 mm Overall Height 2.16” / 55 mm AMPKIT4 What’s in the box? ANL fuse holder with ANL-100A 6 ft. 4-GA Loom Tube Rubber Grommet 17 ft. Red Power Cable: 21mm² OD: 10mm 3 ft. Black Ground Cable: 21mm² OD:10mm 17 ft. Red/Black Twisted RCA Cable 17 ft. Remote Cable 20 x 0.15mm 17 ft. Red/Black Speaker Cable 1.31mm² x 2 wires OD 3.2 x 6.4mm